Send us your distributor and we will remanufacture it for you. A perfect option for those who have time and want to save on costs. The remanufacturing process includes full inspection, disassembly, cleaning and degreasing. We then install a toothed timing belt, 3 German made top bearings, 1 German made lower bearing and a distributor pinion pin (part # 930 602 922 00). Clearances, timing and proper operation are then checked to ensure reliability. Please note: each distributor is remanufactured in Germany, so the lead times can vary.

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.

Bbi autosport Porsche 981 Cayman GT4 streetcup roll bar features 4130 chrome moly steel tubing for excellent strength to weight ratio and addresses issues such as harness angle, seat travel, and engine compartment access. Taking a sensible design approach, the bar mounts to frame structure in the cabin and rear strut towers to provide the strongest mounting points and maximum protection. For superior strength and rigidity, high strength 4130 chrome moly steel tubing was used throughout and all joints are meticulously tig welded by hand. Bolt-in installation is accomplished by using inner diameter tube clamps that are cnc turned and milled for a precise fit. These unique joints eliminate the unsightly through-bo...(choose a part on the right to read more)

We are committed to Porsche cars and are very happy to release an outer tie rod that consists of a monoball joint. Until now this was something that was really only available on racing models. Our tie rod will provide you with unequalled steering precision for street and track use. This component is manufactured in europe and contains the finest materials available, high carbon steel and 7075 t6 aluminum. Installation is seamless, this is a direct replacement for the OEM part number, 965 347 032 00. Sold individually. 2 needed per car. We also suggest replacing your inner tie rod, we have a uniball option, our part # 96434705805sp (qty. 1 is needed) and now is also a good time to replace your worn out inner tie...(choose a part on the right to read more)

Scavenging and aeration in the oil pan have been identified as a problem in 996 and Boxster models experiencing high g-forces on the racetrack. The r-9095 oil pan spacer provides a simple solution. This spacer increases sump capacity by half a quart, providing more reserve to ward off starvation. This kit clears all factory options including the rear skid plate. Added oil capacities as well as increased oil pan surface area increase oil cooling and engine performance. This deep sump oil pan kit has been approved by the Porsche club of america for use in pca club racing stock and prepared class cars.

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be ca...(choose a part on the right to read more)

General Fitment

Race seat mounting option for 996/997/986/987

This product offers a simple installation process and adjustment flexibility.

This assembly mounts to the floor and places your seat in the lowest possible position. The integrated sub-bar is adjustable for proper 5 or 6-point sub-strap routings. This design also incorporates three front-to-rear fixed mounting points for the seat brackets (brackets not included - see 846r907xseries brackets). This entire assembly, including race seat, can be easily installed and removed as a single unit for race events.

Fits: GT3 rsr, 3.8l, 342kw (07-10), GT3 cup 3.8l (10-), GT3 cup s (08-09), GT3 cup 3.6l (05-07), GT3 rs, 331kw (10-), GT3, 320kw (10-), 3.6l, 305kw (07-09),...(choose a part on the right to read more)

General Fitment

Material: 1.5" x 1" x .125" wall carbon steel tubing
Finish: powdercoated in durable black wrinkle-finish.
Weight: 3 lbs.
Installation: attaches to 846r-907x series side mounts.
Miscellaneous: this mount works with the 846r-907x series side mount brackets in conjunction with factory non power 996/Boxster sliders and with the optional 846r-2030 fire extinguisher mount. A one-piece seat with anti-sub strap pass-through is required to use this product.

Fits: GT3 r/rs (99-03), GT3-cup (98-04), GT3 04-05 (04-05), GT3 99-01 (99-01), GT2 (01-05), turbo (01-05), c4s 3.6 (02-05), c4 3.6 (02-05), c2 3.6 (02-05), c4 3.4 (99-01), c2 3.4 (98-01), 3.2 03 - (03-04), 3.2 -02 (00-02), 2.7 03- (03-04), 2.7 -02 (00-0...(choose a part on the right to read more)

General Fitment

This is an original replacement driver's side door panel that comes pre-cut with window cut outs, handle cut outs and door pull cut outs. If you have speakers that you want to retain, you must cut them yourself to size. These are a perfect diy project and can be custom tailored to match your interior options. Made in Germany. Sold individually. Please note: specific vehicle fitment below. This is not an rennsport style panel. It is intended as a direct replacement for the original.

This item may need to be sourced from Germany and would take 2-4 weeks to arrive. Once ordered it cannot be canceled. Please call to check stock or request expedited shipping.

The h-4 headlamp conversion is the best thing you can do for your lighting! bright white light illuminates much further than stock headlamps, showing you the whole roadway. H-4's bolt directly in place of your headlamps. optional 100 watt bulbs are the ultimate. Note: h-4's are a must for us near-sighted drivers! if you have a 356 six volt system please specify and we will substitute the six volt bulbs. order two for a complete set. other higher wattage bulbs available.

General Fitment

Porsche Boxster, Cayman, and 911 (986/987/996) ln spec k1 connecting rods for 2.5, 2.7, 3.2, & 3.4 m96/m97 engines. Replaces factory connecting rod part number 99610397501.

Designed as a performance replacement lightweight connecting rod for added strength to prevent on-track failures common to the stock m96/m97 connecting rod.

Don't risk a connecting rod failure on your $15-20k rebuild. The factory connecting rod utilized in the m96 and m97 engine is manufactured using a powdered metal process and feature cracked caps. This method of manufacturing helps reduce cost, but results in a connecting rod with a limited fatigue life and that is not rebuildable.

Suitable for stock, street driven rebuilds or b...(choose a part on the right to read more)

General Fitment

Panamera models with optional air suspension utilize four sensors to control the ride height. This is accomplished via the use of a small linkage or link which connects the sensor to the suspension. As the car is raised or lowered, the link moves the sensor up or down sending a signal to the computer telling it how high the car is. When you replace the non-adjustable factory link with this adjustable design, the output of the sensor makes the computer believe that the car is higher than it is. So, the computer will lower the ride height. The simplicity of this setup is that it retains full functionality of the factory system. Be warned, all adjustable lowering links are not the same! These links are machined al...(choose a part on the right to read more)

Since 1984, we have established an extensive network of interior specialty vendors that have stockpiled historically correct materials and have the skills necessary to reproduce to o.e. Specifications. Each carpet set is produced in Germany and includes every concours quality detail. Features: genuine German fine velour original fitment jute/rubber backing for floor carpets vinyl bound edges for floor carpets all necessary cut outs and buttons manufactured in Germany sold as a complete set. 1 necessary per car. Please note: when ordering, please indicate the year, model, transmission, with/without factory air conditioning, if the car has full factory leather or a sound package. To customize this set with option...(choose a part on the right to read more)

Since 1984, we have established an extensive network of interior specialty vendors that have stockpiled historically correct materials and have the skills necessary to reproduce to o.e. Specifications. Each carpet set is produced in Germany and includes every concours quality detail. Features: genuine German sliverknit velour - wool carpet thick / plush historically correct drivers side includes original script in gold original fitment jute/rubber backing for floor carpets heel padding vinyl bound edges for floor carpets all necessary cut outs and buttons manufactured in Germany sold as a complete set. 1 necessary per car. Please note: when ordering, please indicate the year, model, transmission, with/without f...(choose a part on the right to read more)

Since 1984, we have established an extensive network of interior specialty vendors that have stockpiled historically correct materials and have the skills necessary to reproduce to o.e. Specifications. Each carpet set is produced in Germany and includes every concours quality detail. Features: genuine German zellstoff velour historically correct drivers side includes original script in gold original fitment jute/rubber backing for floor carpets heel padding vinyl bound edges for floor carpets all necessary cut outs and buttons manufactured in Germany sold as a complete set. 1 necessary per car. Please note: when ordering, please indicate the year, model, transmission, with/without factory air conditioning and i...(choose a part on the right to read more)